BLOG

Wednesday, April 29, 2015

You Don't Know Jack. Get To Know Jack.


So, do you remember the La Forge Royale Miter Jack we've been working on? Is your's finished? Good, because we're just now getting around to shooting some video of the thing. Which we did today, even though it was 68 degrees outside, billowy white clouds, no humidity, light breeze. The kind of weather that makes you wish you were a meter reader. Wait, does anyone do that anymore? Well, you get the drift.

The La Forge Royale miter jack is indeed a piece of imperial hand-tool jiggery that you won't be able to live without, even if you think your fancy-pants shooting board is your Obi-Wan Kenobi to the miter jack's Luke Skywalker. If you think this jack can't perform, it can bullseye whomp rats with the best of them. For the record, after building the La Forge Royale Miter Jack, I've named all my shooting boards Jar-Jar Binks.

But all tomfoolery aside, a miter jack really does deserve a place in your pantheon of appliances. Why? It can do stuff that a shooting board struggles with.

Like angled tenon shoulders. Shooting boards can't do those at all. At all! The miter jack excels here. It provides a dead flat and precise ramp to ride your chisel down, ensuring your shoulders are all in the same plane. Easy and fun. Especially if you like Asian joints. No, I'm not talking about the place downtown with the incredible steamed dumplings (I paused here for 10 minutes and daydreamed) I'm talking about Japanese joinery, like the triple miter.

Or what about square shoulders? With a miter jack you can pare square shoulders with ease, even tweak a tenon you've managed to screw up with a shoulder plane (we've all done it, you know its true.) If you have a French-style flush saw you can even use the jack to saw angled tenon shoulders. No paring required.

Or how about tweaking a miter that's off 45 by just a tad? Easy stuff for the jack. You'd have to re-plane the fence on your shooting board, add a shim, or adjust the fence (if you have an adjustable one). Okay the shooting board works pretty well here, but the jack can hold its own. Shift the workpiece a bit, plane, done. 10 seconds. Shooting board? 10.2 seconds.

And what about half miters? Yeah, the LFRMJ can do those too, with its integral, quick deploying twenty-two-and-a-half-degree auxiliary ramping jaw. Wrapping moldings around forty-five's has never been more fun.

There's more the miter jack can do. Like planing miters on odd-shaped stuff, like crown moulding. But to really know what its capable of, you must first have one at the ready. And we can help you with that. We still have a few miter jack kits left in stock from the small run we did late last year. You can purchase directly on our store page. Each order will receive the decal pictured above along with their kit. If you ordered a kit already, and would like a decal, drop us an email and we'll toss one in the mail for you. If you request a decal, but didn't order a kit, we might feel generous and send you one for free, but we also might lick it first to teach you a lesson about mooching.

If we have any jack kits left in a couple weeks, you'll be able to purchase at the Benchcrafted booth at Handworks.











Friday, April 24, 2015

Take a little bit of Handworks home



With Handworks right around the corner, we've had a few requests for posters.  Initially we weren't going to print any but then decided that it was a decent idea.

We'll have a limited run of these available in the Festhalle barn during Handworks, size is 12x18 printed on medium weight matte finish stock.  Nothing fancy.  Cost will be $1.00 each with all proceeds going to charity (same as all Handworks donations).

Thursday, April 2, 2015

After Seven Years, I Flatten My Bench


This week, after nearly seven years, I flattened the ash Roubo bench I built in 2008. If I recall correctly, I've only flattened it once after the initial session in 2008. I've flattened a lot of benches since then, but never touched this one since it didn't need it. It performed fine, especially for planing thin stuff, which should show you how much your bench is out of whack. It was still dead straight along its length, but when I set the edge of my #7 across the top, I could see about 3/32" of light right in the middle.

If you think about that for a moment, you'll realize that that's flat enough for 99.999% of your work. It really is. Why? Because I've built oodles of furniture on this bench in the past seven years, and none of the processes I use (including hand planing nearly every surface) called out for better.

So more than anything, I flattened the bench for looks and grip, since this hollow hasn't affected my work at all.

Nevertheless, here's some points worth mentioning.



Flatness isn't critical. A hollow across the width of the bench isn't a big deal. Unless you're traversing very wide and thin boards, a hollow is workable. Thicker stuff, especially hardwoods, won't deflect. You might have a problem flattening softwood boards that are 18" and wider, as they might deflect into a hollow. Still, I've done that on this bench and haven't had an issue.

Laminated tops can cup. I didn't expect this top to cup. But it did. Others I've made have not cupped to this extent. It's laminated from 8/4 flat stock, so most of the movement is in the thickness of the bench (that's mostly radial plane on the top surface) not across its width.

End caps work in thick massive tops. The end cap on this bench is strictly to accommodate the wagon vise, but it's actually done a fair amount towards keeping the top flat. In the first picture, I've made about eight passes with my #7, set for a heavy cut. On the fourth pass I was taking full width shavings across the grain about 1/4 down the top. This told me that the end cap had kept the top flat towards the end, and less so farther down the top. In fact, the opposite end of the bench was the most deeply cupped. It has no end cap. So, was the end cap keeping it flat? Or reducing moisture exchange? Probably both. So far all of you who've built benches with two end caps (even though I told you the second was unnecessary) nice move.

All work and no plane make jack a dull blade. Seven years of dust, grime, bits of steel wool, dried finish, dandruff, and skin cells from my Turkish apprentice, allow maybe three passes before the edge of a plane iron becomes a toothing blade. I sharpened five times to flatten this top. I took eleven passes total.

Traverse, and walk away. The best surface texture for a bench top is a toothy one. No, not necessarily one made by a toothing plane (although that works just fine) but the toothy surface you get from planing directly across the grain with a generous cut, and a cambered iron. When I finished this bench, the top was smooth planed because I wanted it to look like furniture. Yes, I'm guilty. But I admit the folly of  my ways. Traverse your top, let it be toothy, and your work will stay put.

No finish is the best finish. I once thought two coats of an oil varnish mix was a perfect finish for a bench top. Enough to keep it clean, that was the goal. But even that thin coat, when applied over a stupidly smooth-planed surface will burnish and polish, and make a slick, hard surface after seven years. The opposite of what you want in a bench top. I would sacrifice the convenience of not having to worry about glue and finish drips at the cost of an ideal surface any day. You can always use a drop cloth on the bench if you need to glue or finish on it. Will an unfinished bench get dirty? Yes. But that will urge you to clean it with your jointer plane. Which brings me to my next point.

Flatten your bench often. Flattening benches is not fun. Okay, maybe the first time, or after a sweet build, but never because you have to. I would rather freshen the surface once a year every year with a pass or two, than the dozen passes this bench required.

Light surfaces are best. The oil varnish on this bench had really darkened the surface. Now it looks bright and fresh, which I like. I'm always after more light, and lightness in the shop.

This bench is now ready for Handworks, where you can see it at the Sauer and Steiner booth. So now you know the real reason for my flattening session.